Large Area Carpet Cleaning:

1. Shake can well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3-square-foot area.

2. Work the foam into carpet in two directions using a damp, colorfast mop.

3. Repeat steps one and two until the area is cleaned.

4. When dry, vacuum thoroughly to remove dried foam and loosened dirt.

Self-Cleaning:

1. Shake can well before and during use. Hold can upside down about 2 feet above carpet. Spray lightly and evenly using a side to side sweeping motion (the carpet color should show through).

2. Allow 15 minutes for the foam to loosen dirt and to dry. Drying time may vary with humidity and depth of carpet pile.

3. When dry, vacuum thoroughly to remove dried foam and loosened dirt.

Upholstery Cleaning:

For upholstery, look for fabric manufacturer's cleanability code tag. Use on fabrics coded "WS" or "W." Do not use if coded "X" or "S."

1. Blot wet soils with a clean absorbent cloth.

2. Shake can well and generously apply directly to stain from a distance of 4 to 6 inches. Allow foam to absorb into stain for 3 minutes.

3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not over-wet fabrics.

4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use.

HINTS FROM THE EXPERTS:

This product is safe to use on most wool, nylon, and stain-resistant carpet.

Contents will clean a carpeted area of 168 square feet (12 by 14 feet).

To avoid rings, clean the entire section where soil occurs.

Use vacuum cleaner with a fresh, empty bag.

If accidentally sprayed on wood furniture, just wipe off.

Not recommended for velvet, silk, vinyl, or leather.

*Based on a scientific study using a proprietary test method to evaluate and compare the cleaning efficacy of RESOLVE High Traffic Foam Carpet Cleaner versus the using a vacuum cleaner alone. Testing was conducted in our carpet laboratories in April, 2011.

Trademark Information:

RESOLVE®

ODOR STOP®